To change your master code: Enter the following procedure without any pauses between keystrokes: Enter Current Master Code + Code Key (8) + User Number (02) + ...

To bypass a zone(s): Enter your 4 digit code + Press BYPASS (Number 6) + Enter the Zone number or numbers* *Depending on which system you have ...

Your system has the following arming modes: AWAY: (Number 2) Arms all perimeter and interior zones. Provides Entry delay on ENTRY/EXIT Zones upon return. STAY: (Number 3) ...

To disarm your system: Enter your user code (4 digits) + Press OFF (Number 1)

If you are a monitored customer you don't. Most of our plans include free battery changes on control panels and wireless transmitters. Your system is monitored for low battery conditions which ...

When an alarm occurs your alarm panel generates a signal to our Central Station. An operator will call the location to verify the alarm. If no one answers or the person ...

FC on the keypad means that the alarm panel could not communicate with the Central Station Receiver. Call us immediately @ 219-663-4390.

Check if your keypad displays the word “CHIME” on the right side of the LCD. If not enter your code and press “9” for chime. The keypad should beep and you ...